Creality Ender 3 BMG + E3D Volcano Mount
Description.
Just 5 easy to print parts that can be used to mount a Bondtech BMG or clone along with an E3D Volcano hotend to an MGN9H or MGN12H Linear rail.
I use this setup now on my Ender 3’s but it could be used on other machines.
I have also provided a drawing with dimensions so that the actual main mount can be cut and drilled out of aluminium.
This is what i did and used 100x50mm Aluminium angle i purchased from ebay for a couple of pounds. It makes for a lot stiffer mount and is pretty straightforward to do with basic tools. You can see it in the pictures.
Materials.
BMG Extruder - Aliexpress
BMG Extruder + Volcano - Aliexpress
4 x M3x8mm Button Head Bolt
6 x M3x12mm Cap Head Bolts
3 x M3x20mm Cap Head Bolt
3 x M3x40mm Cap Head Bolt
1 x M3 Locknut
Print Settings.
Printed in Sunlu Filament Black PETG purchased from Amazon.
Print Temp : 230°C
Bed Temp : 75°C
Print Speed : 50mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 60%
Printed on PEI.
Copyright Licence.
This design has a [Creative Commons Attribution Non-Commercial Share Alike](Creative Commons Attribution Non-Commercial Share Alike) license, which means that you can print, remix, and use this model with design credit to bobblejot, but if you want to sell something then you should ask first, at bobblejot3d@gmail.com