Rostock Pro E3D Effector



Variation on my other Effector by removing the BLTouch mount.


Delta printer End Effector that uses the Original SeeMeCnC injection molded Cup and ball arms.

Different fan ducts included so that you can either use an E3D V6 or Volcano block.

Hopefully you may find it useful.



1 x 3010 Fan – Aliexpress
2 x 3010 Blowers BFB0312MA – Aliexpress
1 x BLTouch or 3D Touch – Aliexpress


13 x Small Plastic self tapping screws #4 ⅜”
6 x M3 washers

For E3D V6 Bltouch:

2 X M3x12mm Bolts
2 x M3 Nylocs

For E3D Volcano Bltouch:

2 X M3x22mm Bolts
2 x M3 Nylocs

For the 3010 Fan i used the Original screw fixings from E3D.

Enjoy :-)

Print Settings.

Printed in Real Filament Black PETG purchased from Amazon.

imageRostock Pro E3D Effector

Nozzle : 0.4mm
Layer Height : 0.3mm

Print Temp : 235°C
Bed Temp : 80°C
Print Speed : 60mm/s

Top Layers : 6
Bottom Layers : 4
Perimeters : 3

Infill : 30%

Printed on PEI.

Download Links.


Thingiverse – thing:3498211

MyMiniFactory – 3d-print-99785

Copyright Licence.


Rostock Pro E3D Effectorcopyright-bycopyright-nccopyright-sa




This design has a [Creative Commons Attribution Non-Commercial Share Alike](Creative Commons Attribution Non-Commercial Share Alike) license, which means that you can print, remix, and use this model with design credit to bobblejot, but if you want to sell something then you should ask first, at


This is a unique website which will require a more modern browser to work!

Please upgrade today!