Creality Ender 3 X Axis Linear Rail Mod
Description.
Just a very simple X Linear rail mod using an MGN9H rail, Y offset is increased slightly due to the rail carriage but it isn’t by much just 7mm.
You will need to file or grind a small bit of material away from the Extruder cover mounting lug where it catches the bottom M3x6mm mounting bolt.
I bought a longer rail 330mm because i don’t use the endstops, most suppliers will cut to any length you need though.
You don’t need any additional hardware other than the rail itself and a few M3 T-Nuts and some Bolts:
Materials.
1 x 320mm long MGN9H Linear Rail – Aliexpress
8 x M3 T-Nuts – Aliexpress
12 x M3x6mm Cap Head Bolts
2 x M3x25mm Cap Head Bolts
3 x M3 Locknut
1 x M3 Washer
And That’s it.
Print Settings.
Printed in Sunlu Filament Black PETG purchased from Amazon.
Print Temp : 230°C
Bed Temp : 75°C
Print Speed : 50mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 60%
Printed on PEI.
Copyright Licence.
This design has a [Creative Commons Attribution Non-Commercial Share Alike](Creative Commons Attribution Non-Commercial Share Alike) license, which means that you can print, remix, and use this model with design credit to bobblejot, but if you want to sell something then you should ask first, at bobblejot3d@gmail.com