Bondtech Style Extruder



Made up this Extruder shell for my recent Creality Ender 3 purchase to replace the stock extruder.


This Bondtech extruder gear housing was designed for 12mm press fit fittings i had purchased from aliexpress,  the housing also uses an M3 square nut for the tensioner instead of a brass insert.


The body is slightly smaller than the original it was based off of, and the filament path is a bit tighter.  The Inserted PTFE tube also goes further into the body on both sides.

Hopefully it may come in handy for somebody.




I have provided Affiliate links to the items i used but you can get them anywhere you please.

1off each of the below items :

M3x20mm Thumb Screw – Aliexpress
M3 Square Nut – Aliexpress
M3 Penny Washer – Aliexpress
Tensioner Spring ( Ultimaker Bed Spring ) – Aliexpress

2 off each of the below items :

12mm OD 4mm ID Push fit fitting – Aliexpress
Collet ( Bowden Clip ) – Aliexpress


My little printable clips

For the Bondtech gears you have the Original gears from Bondtech which would be the preferred option.

Bondtech Original 1.75mm Gears

But as always there are now clones available which may also work.

Bondtech Clone 1.75mm Gears

The choice is yours but it is always preferable to support the actual original designers and developers of a product. But the choice is yours.

Print Settings.


Printed in Real Filament Black ABS purchased from Amazon.

Bondtech Style ExtruderBondtech Style Extruder

Print Temp : 235°C
Bed Temp : 100°C
Print Speed : 60mm/s
Top Layers : 6
Bottom Layers : 4
Perimeters : 3
Infill : 30%

Printed on PEI.

Download Links.


Thingiverse –

MyMiniFactory –

YouMagine –

Pinshape –


Direct –

Copyright Licence.


Bondtech Style Extrudercopyright-bycopyright-nccopyright-sa




This design has a [Creative Commons Attribution Non-Commercial Share Alike](Creative Commons Attribution Non-Commercial Share Alike) license, which means that you can print, remix, and use this model with design credit to bobblejot, but if you want to sell something then you should ask first, at


This is a unique website which will require a more modern browser to work!

Please upgrade today!